Testing Machine
We are offering Water Leak test, Air Leak test, Nitrogen gas leak test, Gas spring test, Tensile test, Universal testing machine, Hydraulic cylinder test, Drain pressure test, Endurance test.
Water Leak Testing
Product Specification:
Brand Power Automations
Model Automatic water leak
testing machine
Material MS Powder coated
Automation grade Automatic
Display type Digital
Display unit Bar/Psi
Product Description:
Leak testing equipment is used to measure the spillage of liquids, vacuums, or gases from enclosed parts or systems. Few configurations require a separate leak detector or an input sensor. These types of leak testing equipment are also fitted with a range of other parts, such as pumps, calibrators, gauges, and cases.Several leak-testing techniques are available, spanning from very simple approaches to systems that are more complex. The most commonly used leak test methods are underwater bubble test, bubble soap paint, pressure and vacuum decay, and tracer gas detectors (halogen, helium and hydrogen).
Air Leak Test
Product Specification:
Brand Power Automations
Type of testing Air leak test
Automation grade Semi Automatic
Display unit Bar
Test pressure 20-24 bar
Working pressure 8 kgs/cm2
Product Description:
- We have developed following two types of Air Leak Test Systems for mechanical seals Twin Station , High Air Pressure Leak Test, Single Station
- Air Pressure Leak Test. We have also developed Hydro Leak Test System for mechanical seal in Dynamic Condition (6000 RPM).
Nitrogen Gas Leak Test
Product Specification:
Brand Power Automations
Type of testing Nitrogen gas test
Product Description:
There are several ways to check for nitrogen leaks. During pressure testing, raise the pressure to the required level, then wrap the area being tested in plastic sheeting. Then an oxygen sensor can be inserted through a hole in the plastic. If the oxygen level reaches less than 20%, then a leak can be confirmed.
Gas Spring Test
Product Specification:
Brand Power Automations
Type of testing Gas spring test Rig
Test type Force
Operating mode Automatic
Test material Spring
Product Description:
The gas spring test rig was designed for force and retraction speed measurement for gas springs. Features – Nominal force: 10 kN axial pressure load – Stroke: up to 800 mm (spring drive) – Digital control freely programmable – Tests carried out and evaluated automatically by means of force and displacement transducers.
Tensile Testing Machine
Product Specification:
Brand Power Automations
Material Stainless steel
Accuracy 1%
Capacity 5 ton
Resolution 0.1 mm
Product Description:
A tensile tester or tensile testing machine is used to determine the strength and deformation behavior of a material up to the point of fracture. Choosing the right tensile testing machine depends on the material to be tested and the standard(s) that must be followed.
Universal Testing Machine
Product Specification:
Brand Power Automations
Material Mild steel
Capacity 50kN
Display type LCD touch screen
Product Description:
Electronic range of UTM’s are fast, accurate & simple to operate. In these machines load and displacement are displayed on the digital display unit or monitor in the respective engineering units. Digital display unit has RS 232/ USB connectivity to computer for real time transfer data to computer. When connected to computer online graph can be displayed on the screen. These machines are supported by windows based user friendly software which can store, retrieve readings as and when required.
Hydraulic Cylinder Test
Product Specification:
Brand Power Automations
Material Steel , cast Iron
Usage For cylinder testing
Product Description:
- A hydraulic cylinder test stand is simply an apparatus capable of mirroring the conditions a hydraulic cylinder will be subjected to once mounted to the machine and reporting the results as the cylinder is tested.
- A hydraulic tank, an electrically-powered hydraulic pump, hydraulic lines and fittings, and gauges to measure pressure allow the cylinder to be exposed to high degrees of pressure and for the results to be measured and recorded.
Drain Pressure Test
Product Specification:
Brand Power Automations
Time resolution 0.1 Hour/6 minute
Pressure 0-100/160/250 Bar
Usage Check fluid pressure
testing equipment
such as cylinders,boiler
tubes pipes
Product Description:
Hydrostatic pressure testing machine are common procedure used to check fluid pressure testing equipments vessel, such as, cylinders, boiler, tubes pipe, valves, castings, components etc..
Endurance Test
Product Specification:
Brand Power Automations
Material Aluminum frame
Power source Electric
Product Description:
The endurance testing equipment range is widely used to measure endurance for various items, such as bicycles, tires, wheels and seats, footwear and leather, paper and packaging, and wires and cables. The endurance testing machines are known for their accurate readings and their ability to perform efficiently even during complex situations. Generally, a group of testing machines is clubbed together to build a system to address the testing requirements.
No. 51-A, 2 nd Cross 6th Street, Sector 1,
North Phase, Sidco Industrial Estate,
Ambattur, Chennai – 600098.
+91 98406 29551
powerautomationsindia@gmail.com
Designed & Developed by
